ITS4200SSJDXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 350mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1.4W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.2A |
| Operating Supply Voltage | 52V |
| Interface | On/Off |
| Nominal Supply Current | 800μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 180 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 13.5V |
| Turn-Off Delay Time | 200 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~52V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 150m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ITS4200SSJDXUMA1 Overview
It's?packaged?in?the way?of?a?Cut Tape (CT).Package 8-SOIC (0.154, 3.90mm Width) contains it.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts has been specified.In terms of features, the LED driving board has Status Flag.It contains 8 terminations.During operation, the 8 pins are used.There are 1 functions of the LED driver.To meet the operation criteria, the maximum output current drops to 1.2A.The supply voltage can be 13.5V for high efficiency.This lighting driver is mounted in the way of Surface Mount.Lighting drivers with 350mOhm resistance are used.In order to maximize efficiency, the supply voltage should be set at 52V.
ITS4200SSJDXUMA1 Features
Supplied from 13.5V
Resistance of 350mOhm
ITS4200SSJDXUMA1 Applications
There are a lot of Infineon Technologies ITS4200SSJDXUMA1 Power Switches ICs applications.
- USB Ports/Hubs
- Portable GPS Device
- Set-top-box
- Set-Top Boxes
- Hot-Swap Systems
- HDD and SSD
- Notebook and Tablet Computers
- Portable Music Players
- Low Voltage I/O System Power
- Telecom and Network Systems
