banner_page

ITS42K5DLDFXUMA1

P-Channel 0.5mm PMIC 10 Pin 13.5V 10-TFDFN Exposed Pad


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-ITS42K5DLDFXUMA1
  • Package: 10-TFDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 425
  • Description: P-Channel 0.5mm PMIC 10 Pin 13.5V 10-TFDFN Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 10-TFDFN Exposed Pad
Number of Pins 10
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
Published 2014
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2A (4 Weeks)
Number of Terminations 10
Terminal Finish Tin (Sn)
Max Power Dissipation 660mW
Terminal Position DUAL
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 13.5V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Number of Outputs 2
Output Type P-Channel
Max Output Current 250mA
Supply Voltage-Min (Vsup) 4.5V
Interface On/Off
Nominal Supply Current 25μA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Halogen Free Halogen Free
Nominal Input Voltage 13.5V
Ratio - Input:Output 1:1
Voltage - Load 4.5V~42V
Fault Protection Over Temperature, UVLO
Output Peak Current Limit-Nom 0.4A
Rds On (Typ) 2.5 Ω
Turn Off Time 30 μs
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SOURCE
Height Seated (Max) 1.15mm
Length 3.3mm
Width 3.3mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

ITS42K5DLDFXUMA1 Overview


It is packaged in the form of a Tape & Reel (TR).Package 10-TFDFN Exposed Pad contains it.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type that it owns.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.The lighting driver has a total of 2 outputs that are available for use.It uses a supply voltage of Not Required to operate.A maximum output voltage of P-Channel volts has been specified.A total of 10 terminations have been found in it.10 pins are used for operation.As far as functions are concerned, the lighting driver has 1.Maximum output current falls to 250mA when operation criteria are met.The supply voltage can be 13.5V for high efficiency.It is mounted in the way of Surface Mount.For normal operation, the supply voltage (Vsup) must be kept above 4.5V.

ITS42K5DLDFXUMA1 Features


Supplied from 13.5V

ITS42K5DLDFXUMA1 Applications


There are a lot of Infineon Technologies ITS42K5DLDFXUMA1 Power Switches ICs applications.

  • Handheld Devices
  • USB Power Distribution
  • USB3.1 Power Delivery
  • Set-top-box
  • PDAs
  • Storage Drives
  • Hard Disk Drives
  • PC Card Hot Swap
  • Wireless Modem Data Cards
  • USB Protection

Write a review

Note: HTML is not translated!
    Bad           Good