ITS4300SSJDXUMA1
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 400mA |
| Operating Supply Voltage | 34V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 140 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 13.5V |
| Turn-Off Delay Time | 170 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 0.4A |
| Rds On (Typ) | 300m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 600mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1.4W |
| Technology | NMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
ITS4300SSJDXUMA1 Overview
As a result, it is packaged in the form of a Cut Tape (CT).The 8-SOIC (0.154, 3.90mm Width) package contains it.The mounting type of the LED driver is Surface Mount.General Purpose is the type of switch owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.There are 1 outputs available on this lighting driver.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Status Flag.It contains 8 terminations.The operation is performed through the 8 pins.It is important to note that the LED driving board has 1 functions.The maximum output current must drop to 400mA to meet the operation criteria.High efficiency is possible at 13.5V supply voltage.The lighting driver is mounted in the way of Surface Mount.There is 600mOhm resistance on the LED driver.In order to achieve the best efficiency, the supply voltage should be set to 34V.
ITS4300SSJDXUMA1 Features
Supplied from 13.5V
Resistance of 600mOhm
ITS4300SSJDXUMA1 Applications
There are a lot of Infineon Technologies ITS4300SSJDXUMA1 Power Switches ICs applications.
- USB Ports/Hubs
- Notebook PC
- PDAs
- Hot Swap
- Various applications equipped with buttons
- USB Power Distribution
- Storage (HDDs, SSDs)
- Wireless Modem Data Cards
- Hot Swap
- Wireless Headsets
