ITS436L2HKSA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Number of Pins | 5 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PROFET® |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 75W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | ITS436L2 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 8.8A |
| Supply Voltage-Max (Vsup) | 43V |
| Interface | On/Off |
| Nominal Supply Current | 800μA |
| Output Configuration | High Side |
| Power Dissipation | 75W |
| Output Current | 8.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.75V~43V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 200 μs |
| Output Peak Current Limit-Nom | 9.8A |
| Rds On (Typ) | 35m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
ITS436L2HKSA1 Overview
It is packaged in the manner of a Tube.In the TO-220-5 Formed Leads package, it is included.Mounting type Through Hole is selected for the LED driving board.There is a General Purpose switch type associated with it.Keeping the temperature at -30°C~85°C TA ensures reliable operation.There are 1 outputs available on this lighting driver.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.Status Flag features are available on the lighting driver.It belongs to the family ITS436L2.It contains 5 terminations.For operation, we use the 5 pins.As far as functions are concerned, the lighting driver has 1.The maximum output current drops to 8.8A in order to meet the operation criteria.The supply voltage of 12V is conducive to high efficiency.As a result, it is mounted in the manner of Through Hole.A total of 3 pins are present on it.Electrical components such as this are included in the PROFET? series.This case results in a 8.8A output current.Vsup (maximum supply voltage) is set to 43V.
ITS436L2HKSA1 Features
Supplied from 12V
ITS436L2HKSA1 Applications
There are a lot of Infineon Technologies ITS436L2HKSA1 Power Switches ICs applications.
- Hot Swap
- USB Protection
- Portable/Handheld Devices
- Portable GPS
- Solid-State Drives
- USB Power Distribution
- Notebook PC
- Set-Top Boxes
- Hot Swap
- Wireless Headsets
