banner_page

ITS436L2SHKSA1

N-Channel PMIC PROFET? Series ITS436L2 12V TO-220-5


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-ITS436L2SHKSA1
  • Package: TO-220-5
  • Datasheet: PDF
  • Stock: 808
  • Description: N-Channel PMIC PROFET? Series ITS436L2 12V TO-220-5 (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case TO-220-5
Operating Temperature -30°C~85°C TA
Packaging Tube
Published 2006
Series PROFET®
Feature Status Flag
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Max Power Dissipation 75W
Terminal Position SINGLE
Number of Functions 1
Supply Voltage 12V
Base Part Number ITS436L2
Pin Count 3
JESD-30 Code R-PSFM-T5
Number of Outputs 1
Output Type N-Channel
Max Output Current 8.8A
Supply Voltage-Max (Vsup) 43V
Supply Voltage-Min (Vsup) 4.75V
Interface On/Off
Nominal Supply Current 800μA
Output Configuration High Side
Power Dissipation 75W
Output Current 8.8A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Halogen Free Not Halogen Free
Ratio - Input:Output 1:1
Voltage - Load 4.75V~43V
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Turn On Time 200 μs
Output Peak Current Limit-Nom 9.8A
Rds On (Typ) 35m Ω
Turn Off Time 250 μs
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

ITS436L2SHKSA1 Overview


It is packaged in the manner of a Tube.It is included in the package TO-220-5.The mounting type of the LED driver is Through Hole.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -30°C~85°C TA.There is a default setting of 1 for output.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.It is a member of the ITS436L2 family.There are 5 terminations in it.The LED driver has 1 functions.This operation requires the maximum output current to be decreased to 8.8A.High efficiency is possible when the supply voltage is set to 12V.It is positioned in the direction of Through Hole.3 pins are connected to it in total.This electrical component is included in the PROFET? series.In this case, the output current is set to 8.8A.The lighting driver is configured to have a maximum supply voltage of 43V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 4.75V.

ITS436L2SHKSA1 Features


Supplied from 12V

ITS436L2SHKSA1 Applications


There are a lot of Infineon Technologies ITS436L2SHKSA1 Power Switches ICs applications.

  • Notebook and Tablet Computers
  • Set-top-box
  • Smart Phones, Feature Phones
  • Portable/Handheld Devices
  • Hard Disk Drives
  • Portable GPS Device
  • Hot Swap
  • Gaming
  • Hot-Swap Systems
  • USB Protection

Write a review

Note: HTML is not translated!
    Bad           Good