ITS4880RCUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | miniPROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 8 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ITS4880 |
| Pin Count | 36 |
| JESD-30 Code | R-PDSO-G36 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 45V |
| Supply Voltage-Min (Vsup) | 11V |
| Interface | On/Off |
| Current - Output (Max) | 625mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 11V~45V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 100 µs |
| Output Peak Current Limit-Nom | 0.2A |
| Rds On (Typ) | 150m Ω |
| Turn Off Time | 150 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 3.5mm |
| Length | 15.9mm |
| Width | 11mm |
| RoHS Status | ROHS3 Compliant |
ITS4880RCUMA1 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included in the package 36-BSSOP (0.433, 11.00mm Width) Exposed Pad.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type it owns.To ensure reliable operation, set the temperature to -30°C~85°C TA.There are 8 outputs available on this lighting driver.A supply voltage of Not Required is required for it to operate.Voltage output is N-Channel volts at maximum.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.It is part of the ITS4880 family of LED drivers.A total of 36 terminations can be found in it.It has 8 functions.The LED driver output is limited to 625mAV.The supply voltage can be 15V for high efficiency.It is equipped with a total of 36 pins.Electrical components such as this are included in the miniPROFET? series.This LED driver is configured to have a maximum supply voltage of 45V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 11V.
ITS4880RCUMA1 Features
Supplied from 15V
ITS4880RCUMA1 Applications
There are a lot of Infineon Technologies ITS4880RCUMA1 Power Switches ICs applications.
- Wearable Devices
- Gaming
- Portable Music Players
- Smart Phones, Feature Phones
- Set-top-box
- Wireless Modem Data Cards
- Handheld Devices
- USB Ports/Hubs
- Storage (HDDs, SSDs)
- HDD, SSD
