ITS5215L
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 12 |
| Packaging | Cut Tape |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 12 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -30°C |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1mm |
| Pin Count | 12 |
| Max Output Current | 15A |
| Temperature Grade | COMMERCIAL EXTENDED |
| Number of Channels | 2 |
| Voltage | 16V |
| Interface | Parallel |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5.5V |
| Power Dissipation-Max | 3.1W |
| Nominal Supply Current | 1.2mA |
| Current | 9.5A |
| Power Dissipation | 3.1W |
| Max Supply Current | 1.2mA |
| Current - Output | 3.7A |
| Max Input Voltage | 16V |
| Output Current per Channel | 4.7A |
| Nominal Input Voltage | 40V |
| Driver Number of Bits | 2 |
| Load Current | 12A |
| Output Peak Current Limit-Nom | 0.7A |
| Drain to Source Resistance | 90mOhm |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 2.35mm |
| Length | 6.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
ITS5215L Overview
The SOIC package includes it.In the current state, 2 channels are accessible.It's?packaged?in?the?form?of?a?Cut Tape.12 terminations are present in total.Its terminal position is DUAL.Total number of pins is 12.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 12V.Hot-swappable device is necessary to use 12 pins in order to operate the device.In Peripheral Drivers, this gadget is self-contained.In order to ensure stable operation, a maximum operating temperature of 85°C°C must be set.Hot-swappable device works at a minimum temperature of -30°C degrees Celsius to maintain reliabilHot-swappable devicey.Hot Swap can handle a maximum supply voltage of 40VV.As low a supply voltage as possible, such as 5.5VV, is possible.When operating criteria are met, the maximum output current is reduced to 15A.There is a maximum current requirement of 1.2mA for it to operate.The device has {0} resistance.
ITS5215L Features
The terminal position of 12
ITS5215L Applications
There are a lot of Infineon Technologies ITS5215L hot swap controllers applications.
- Industrial high-side switches
- Server backplane system
- Switch
- Automatic restart after load failure
- Base station
- Electric vehicle
- Datacom
- Redundant-array-of-independent-disk (RAID) storage
- Inrush current control
- Reverse current protection
