ITS612N1E3230HKSA1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 |
| Number of Pins | 7 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 36W |
| Terminal Position | SINGLE |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Reach Compliance Code | unknown |
| Base Part Number | ITS612N1 |
| Pin Count | 3 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.8A |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 600μA |
| Output Configuration | High Side |
| Power Dissipation | 36W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 400 μs |
| Output Peak Current Limit-Nom | 4.4A |
| Rds On (Typ) | 160m Ω |
| Turn Off Time | 400 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| RoHS Status | RoHS Compliant |
ITS612N1E3230HKSA1 Overview
The package is in the form of a Tube.It is included with the TO-220-7 package as well.Through Hole is the mounting type of the LED driver.The switch type of this switch is General Purpose.It is best to set the temperature to -30°C~85°C TA to ensure reliable operation.The lighting driver has a total of 2 outputs that are available for use.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts on this LED driver.A lighting driver with Auto Restart, Status Flag features is available.As you can see, it comes from the ITS612N1 family.A total of 7 terminations can be found in it.In order to operate, 7 pins are used.It consists of 2 functions.This results in the maximum output current dropping to 1.8A to meet the operation criteria.Supply voltages of 12V allow for high efficiency.Through Hole is mounted in the way of this lighting driver.3 pins are connected to it in total.It is included in the PROFET? series.When this is the case, the output current is set to 3.5A.In this LED driver, the maximum supply voltage is configured to be 34V (Vsup).Normal operation requires Vsup above 5V.
ITS612N1E3230HKSA1 Features
Supplied from 12V
ITS612N1E3230HKSA1 Applications
There are a lot of Infineon Technologies ITS612N1E3230HKSA1 Power Switches ICs applications.
- Smartphone and PDA
- PC Cards
- Hot Swap
- Hot-Swap Systems
- Hot Swap
- Set-top-box
- Portable Devices
- Telecom and Network Systems
- Portable Music Players
- Solid-State Drives
