ITS612N1HKSA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 (Formed Leads) |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 36W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ITS612N1 |
| Pin Count | 3 |
| JESD-30 Code | R-PZFM-T7 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.8A |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 600μA |
| Output Configuration | High Side |
| Power Dissipation | 36W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 400 μs |
| Output Peak Current Limit-Nom | 4.4A |
| Rds On (Typ) | 160m Ω |
| Turn Off Time | 400 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ITS612N1HKSA1 Overview
As a result, it is packaged in the form of a Tube.Package TO-220-7 (Formed Leads) contains it.The lighting driver is mounted in the Through Hole position.A General Purpose switch type is owned by it.Keeping the temperature at -30°C~85°C TA ensures reliable operation.The lighting driver is equipped with 2 outputs that can be used.A voltage of Not Required is used to power it.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Auto Restart, Status Flag features.This object belongs to the ITS612N1 family.It contains 7 terminations.The LED driving board has a total of 2 functions.This results in the maximum output current dropping to 1.8A to meet the operation criteria.Using a voltage of 12V allows for high efficiency.As a result, it is mounted in the manner of Through Hole.There are 3 pins in total on this board.These electrical components are part of the PROFET? series.This results in a 3.5A output current.In this case, Vsup (maximum supply voltage) is set to 34V.In order to operate normally, the supply voltage (Vsup) must be maintained above 5V.
ITS612N1HKSA1 Features
Supplied from 12V
ITS612N1HKSA1 Applications
There are a lot of Infineon Technologies ITS612N1HKSA1 Power Switches ICs applications.
- Portable Music Players
- Portable GPS Device
- Portable/Handheld Devices
- Smart Phones, Feature Phones
- USB3.1 Power Delivery
- Wearable Devices
- PC Cards
- Storage (HDDs, SSDs)
- Telecom and Network Systems
- USB Power Distribution
