ITS621L1
| Parameters | |
|---|---|
| Package / Case | TO-220-7 |
| Surface Mount | NO |
| Number of Pins | 7 |
| Pbfree Code | yes |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -30°C |
| Subcategory | Peripheral Drivers |
| Terminal Position | ZIG-ZAG |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 3 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 8A |
| Temperature Grade | COMMERCIAL EXTENDED |
| Voltage | 16V |
| Interface | Parallel |
| Power Dissipation-Max | 75W |
| Nominal Supply Current | 4mA |
| Current | 10mA |
| Power Dissipation | 75W |
| Max Supply Current | 4mA |
| Current - Output | 3.5A |
| Halogen Free | Not Halogen Free |
| Output Current per Channel | 4.4A |
| Drain to Source Voltage (Vdss) | 34V |
| Nominal Input Voltage | 34V |
| Driver Number of Bits | 2 |
| Turn On Time | 400 µs |
| Load Current | 4.4A |
| Output Peak Current Limit-Nom | 8.5A |
| Drain to Source Resistance | 100mOhm |
| Turn Off Time | 400 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 4.4mm |
| Length | 9.9mm |
| Width | 9.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
ITS621L1 Overview
It's included in the TO-220-7 package.In total, it has 7 terminations.The terminal position of the device is ZIG-ZAG.A total of 3 pins are present on it.High efficiency can be achieved by using 12V as supply voltage.This device uses 7 pins for operation.As far as Peripheral Drivers is concerned, this gadget is self-contained.The maximum operating temperature of 85°C°C allows for stable operation.Hot-swappable device works at a minimum temperature of -30°C degrees Celsius to maintain reliabilHot-swappable devicey.As a default, it's set to output 2.In order to satisfy the operation criteria, the maximum output current must drop to 8A.Its maximum current requirement is 4mA.There is 80mOhm resistance in the device.
ITS621L1 Features
The terminal position of 3
ITS621L1 Applications
There are a lot of Infineon Technologies ITS621L1 hot swap controllers applications.
- Industrial computers and servers
- Other forms of communications infrastructure
- Short-circuit protection in real time
- Redundant negative voltage supplies
- Backplane
- Modern analog communication
- Overcurrent protection
- Industrial
- Raid
- Thermal limitation
