ITS621L1HKSA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 (Formed Leads) |
| Number of Pins | 7 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 75W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | ITS621L1 |
| Pin Count | 3 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 4mA |
| Output Configuration | High Side |
| Power Dissipation | 75W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 400 μs |
| Output Peak Current Limit-Nom | 8.5A |
| Rds On (Typ) | 80m Ω |
| Turn Off Time | 400 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ITS621L1HKSA1 Overview
It is packaged in the form of a Tube.The TO-220-7 (Formed Leads) package includes it.This LED driving board is mounted using the mounting type Through Hole.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -30°C~85°C TA.The LED driver has 2 outputs.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts has been specified.A lighting driver with Auto Restart, Status Flag features is available.It belongs to the family ITS621L1.As a result, there are 7 terminations.For operation, we use the 7 pins.There are 1 functions of the LED driver.This results in the maximum output current dropping to 3.5A to meet the operation criteria.The supply voltage of 12V is conducive to high efficiency.It is mounted in the way of Through Hole.This LED driver is equipped with a total of 3 pins.This electrical component is part of the PROFET? series.In this case, the output current is set to 3.5A.This LED driver is configured to have a maximum supply voltage of 34V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 5V.
ITS621L1HKSA1 Features
Supplied from 12V
ITS621L1HKSA1 Applications
There are a lot of Infineon Technologies ITS621L1HKSA1 Power Switches ICs applications.
- Wireless Headsets
- Wireless Modem Data Cards
- Wearable Devices
- Solid-State Drives
- USB Power Distribution
- PC Cards
- Portable Devices
- Storage Drives
- Smart Phones, Feature Phones
- Wireless/Networking Cards
