ITS640S2
| Parameters | |
|---|---|
| Package / Case | TO-220-7 |
| Surface Mount | NO |
| Number of Pins | 7 |
| Pbfree Code | yes |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Resistance | 27mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -30°C |
| Subcategory | Peripheral Drivers |
| Terminal Position | ZIG-ZAG |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 50A |
| Temperature Grade | COMMERCIAL EXTENDED |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | Parallel |
| Power Dissipation-Max | 85W |
| Nominal Supply Current | 1.2mA |
| Power Dissipation | 85W |
| Max Supply Current | 1.2mA |
| Current - Output | 11.4A |
| Halogen Free | Not Halogen Free |
| Output Current per Channel | 4.5A |
| Nominal Input Voltage | 34V |
| Driver Number of Bits | 1 |
| Load Current | 24A |
| Output Peak Current Limit-Nom | 12.6A |
| Drain to Source Resistance | 30mOhm |
| Turn Off Time | 200 µs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
ITS640S2 Overview
Package TO-220-7 includes it.Hot-swappable device has a total of 7 terminations.The terminal position of the device is ZIG-ZAG.3 pins make up the entire device.High efficiency can be achieved by using 12V as supply voltage.During operation, 7 pins are used.A gadget like this is self-contained in Peripheral Drivers.Hot-swappable device is stable to operate at a temperature of 85°C°C at the maximum.The system must function at a minimum temperature of -30°C degrees Celsius in order to maintain its reliability.Normally, Vsup should remain above 5V.Hot Swap is defaulted to output 1.Consequently, 50A is the maximum output current that can be achieved to meet the operation criteria.Hot Swap operates at a maximum current of 1.2mA.Resistance to 27mOhm is present in the device.
ITS640S2 Features
The terminal position of 3
ITS640S2 Applications
There are a lot of Infineon Technologies ITS640S2 hot swap controllers applications.
- Continuous monitoring of device temperature
- Base station
- Industrial application
- Hard drive
- Loads
- Remote access server
- Modern analog communication
- Thermal limitation
- Electric vehicle
- Server backplane system
