ITS640S2HKSA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 (Formed Leads) |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 85W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ITS640S2 |
| Pin Count | 3 |
| JESD-30 Code | R-XZFM-T7 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 4A |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 1.2mA |
| Output Configuration | High Side |
| Power Dissipation | 85W |
| Output Current | 11.4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 12.6A |
| Rds On (Typ) | 27m Ω |
| Turn Off Time | 200 μs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ITS640S2HKSA1 Overview
Tube is how it's packaged.In the TO-220-7 (Formed Leads) package, it is included.The lighting driver has the mounting type Through Hole.It owns the General Purpose switch type.It is recommended that the temperature be set to -30°C~85°C TA for reliable performance.It is possible to use 1 outputs in the lighting driver.Operation is based on Not Required supply voltage.A maximum voltage of N-Channel volts is available from the output of this LED driver.Features of the lighting driver are Auto Restart, Status Flag.As you can see, it comes from the ITS640S2 family.It contains 7 terminations.Currently, the lighting driver has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 4A.High efficiency is possible when the supply voltage is set to 12V.As a result, it is mounted in the manner of Through Hole.A total of 3 pins are present on it.It is part of the PROFET? series.In this case, the output current will be set to 11.4A.The Vsup value (maximum supply voltage) is set to 34V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 5V.
ITS640S2HKSA1 Features
Supplied from 12V
ITS640S2HKSA1 Applications
There are a lot of Infineon Technologies ITS640S2HKSA1 Power Switches ICs applications.
- Gaming
- Hot Swap
- Storage Drives
- Smart Phones, Feature Phones
- Solid State Drivers
- Notebook PC
- Portable GPS
- Hot Swaps
- Portable GPS Device
- Wireless Modem Data Cards
