ITS640S2SHKSA1
| Parameters | |
|---|---|
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 1.2mA |
| Output Configuration | High Side |
| Power Dissipation | 85W |
| Output Current | 11.4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 12.6A |
| Rds On (Typ) | 27m Ω |
| Turn Off Time | 200 μs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| RoHS Status | RoHS Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 (Formed Leads) |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 85W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | unknown |
| Base Part Number | ITS640S2 |
| Pin Count | 3 |
| JESD-30 Code | R-XSFM-T7 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 4A |
ITS640S2SHKSA1 Overview
It is package in Tube case.In the TO-220-7 (Formed Leads) package, it is included.The mounting type of the LED driver is Through Hole.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -30°C~85°C TA for reliable performance.The lighting driver has a total of 1 outputs that are available for use.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It is equipped with Auto Restart, Status Flag features.The ITS640S2 family contains this object.It contains 7 terminations.There are 1 functions of the LED driver.The maximum output current must drop to 4A to meet the operation criteria.The supply voltage can be 12V for high efficiency.The lighting driver is mounted in the direction of Through Hole.This LED driver is equipped with a total of 3 pins.This electrical component can be found in the PROFET? series.In this case, the output current is set to 11.4A.The lighting driver is configured to have a maximum supply voltage of 34V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 5V.
ITS640S2SHKSA1 Features
Supplied from 12V
ITS640S2SHKSA1 Applications
There are a lot of Infineon Technologies ITS640S2SHKSA1 Power Switches ICs applications.
- Solid State Drivers
- PDAs
- Gaming
- Hard Disk Drives
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers
- Telecom and Network Systems
- Storage Drives
- Various applications equipped with buttons
- Smart Phones, Feature Phones
