ITS711L1FUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ITS711L1 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 1.7A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 165m Ω |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| RoHS Status | ROHS3 Compliant |
ITS711L1FUMA1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in 20-SOIC (0.295, 7.50mm Width).This LED driving board is mounted using the mounting type Surface Mount.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -30°C~85°C TA for reliable performance.The lighting driver has a total of 4 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage is N-Channel volts.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.This object belongs to the ITS711L1 family.In total, there are 20 terminations.The LED driver has 1 functions.In this case, the LED driving board can produce only 1.7AV as its maximum output.With a supply voltage of 12V, high efficiency is possible.As a result, it has a total of 20 pins.It is part of the PROFET? series.A normal operation requires that the supply voltage (Vsup) remain above 5V.
ITS711L1FUMA1 Features
Supplied from 12V
ITS711L1FUMA1 Applications
There are a lot of Infineon Technologies ITS711L1FUMA1 Power Switches ICs applications.
- PC Cards
- Smart Phones, Feature Phones
- Portable GPS
- Set-Top Boxes
- USB Protection
- Hot Swap
- Portable Music Players
- Portable/Handheld Devices
- Various applications equipped with buttons
- Smartphone and PDA
