Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Surface Mount |
YES |
Operating Temperature |
-30°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
1997 |
Series |
PROFET® |
JESD-609 Code |
e3 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
4 |
Supply Voltage |
12V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
ITS716 |
Pin Count |
20 |
JESD-30 Code |
R-PDSO-G20 |
Number of Outputs |
4 |
Qualification Status |
Not Qualified |
Output Type |
N-Channel |
Supply Voltage-Min (Vsup) |
5.5V |
Interface |
On/Off |
Current - Output (Max) |
2.3A |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~40V |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Turn On Time |
250 µs |
Output Peak Current Limit-Nom |
0.7A |
Rds On (Typ) |
110m Ω |
Turn Off Time |
270 µs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SINK |
Height Seated (Max) |
2.65mm |
Length |
12.8mm |
Width |
7.6mm |
RoHS Status |
ROHS3 Compliant |
ITS716GFUMA1 Overview
Tape & Reel (TR) is the way it's packaged.There is a 20-SOIC (0.295, 7.50mm Width) package that includes it.In this case, the LED driving board is mounted as Surface Mount.A General Purpose switch type is owned by it.To ensure reliable operation, set the temperature to -30°C~85°C TA.The lighting driver has a total of 4 outputs that are available for use.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The lighting driver has Status Flag features.The ITS716 family consists of this type.A total of 20 terminations can be found in it.The LED driver has 4 functions.From the lighting driver, there is a maximum output of 2.3AV.High efficiency is possible when the supply voltage is set to 12V.As a result, it has a total of 20 pins.These electrical components are part of the PROFET? series.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 5.5V.
ITS716GFUMA1 Features
Supplied from 12V
ITS716GFUMA1 Applications
There are a lot of Infineon Technologies ITS716GFUMA1 Power Switches ICs applications.
- Wireless/Networking Cards
- Telecom and Network Systems
- Solid State Drivers
- Portable Devices
- PC Card Hot Swap
- Portable GPS
- Storage (HDDs, SSDs)
- Wireless Modem Data Cards
- Portable Music Players
- Smart Phones, Feature Phones