ITS724GFUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ITS724 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 3A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~40V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 250 µs |
| Output Peak Current Limit-Nom | 8.5A |
| Rds On (Typ) | 70m Ω |
| Turn Off Time | 270 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| RoHS Status | ROHS3 Compliant |
ITS724GFUMA1 Overview
A Tape & Reel (TR) is used to package it.The 20-SOIC (0.295, 7.50mm Width) package includes it.This LED driving board is mounted using the mounting type Surface Mount.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -30°C~85°C TA.There are 4 outputs available on this lighting driver.With a supply voltage of Not Required, the LED driving board operates.It has a maximum output voltage of N-Channel volts.It has a total of Status Flag features.It is part of the ITS724 family of LED drivers.A total of 20 terminations can be found in it.It consists of 4 functions.In this case, the LED driving board can produce only 3AV as its maximum output.The supply voltage of 12V is conducive to high efficiency.There are 20 pins in total on this board.It belongs to the PROFET? series.In order to operate normally, the supply voltage (Vsup) must be maintained above 5.5V.
ITS724GFUMA1 Features
Supplied from 12V
ITS724GFUMA1 Applications
There are a lot of Infineon Technologies ITS724GFUMA1 Power Switches ICs applications.
- Portable/Handheld Devices
- Wireless Modem Data Cards
- Smartphone and PDA
- Notebook PC
- Mobile Communication Devices
- Wireless Headsets
- Portable GPS
- Hot Swaps
- Storage Drives
- Notebook and Tablet Computers
