IX6R11S3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.25W |
| Technology | CMOS |
| Voltage - Supply | 10V~35V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IX6*11 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 35V |
| Power Supplies | 15V |
| Output Current | 6A |
| Input Type | Non-Inverting |
| Rise Time | 35ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 25ns 17ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 6A |
| Supply Voltage1-Nom | 15V |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 6V 9.6V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IX6R11S3 Overview
A higher level of flexibility is provided by its 16-SOIC (0.295, 7.50mm Width) package.Gate drivers is package in Tube case.2 drivers are incorporated for its configuration.Surface Mount is the way in which it is mounted.By using 10V~35V supply voltage, it is able to demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET has been used in its design.In this device, temperatures must not exceed -40°C~125°C TA.Mosfet driver uses Non-Inverting as Mosfet drivers input type.It's configured with 16 terminations.Numerous related parts are available for its base part number IX6*11.Surface Mount is the way it takes to mount the device.There are 16 pins available in the device.The device is specifically designed to function with a supply voltage of 15V V.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.On the board, there are 16 component pins.Maximum (Bootstrap) voltage can be up to 600V.This device is capable of delivering 6A current.Considering its maximum power dissipation, 1.25W shows its maximum capacity to transfer and conduct power loss without overheating.Due to its power supplies of 15V, it solves the power supply problem for a wide range of applications.Mosfet gate drivers is recommended that you set the operating supply voltage to 35V.
IX6R11S3 Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.25W
IX6R11S3 Applications
There are a lot of IXYS IX6R11S3 gate drivers applications.
- Motor Drives
- Portable computers
- Isolated Supplies for controller area network (CAN),
- Industrial Motor Inverter - Power Tools, Robotics
- High current laser/LED systems
- A/D drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Dual-Battery Systems
- Industrial Modules
- Motor Controls
