IXA531L4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 2W |
| Voltage - Supply | 8V~35V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXA531 |
| Pin Count | 44 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Max Output Current | 600mA |
| Power Dissipation | 2W |
| Output Current | 600mA |
| Propagation Delay | 550 ns |
| Input Type | Inverting |
| Rise Time | 190ns |
| Fall Time (Typ) | 75 ns |
| Rise / Fall Time (Typ) | 125ns 50ns |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 0.55 μs |
| Output Peak Current Limit-Nom | 0.6A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 600mA 600mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Turn Off Time | 0.55 μs |
| High Side Voltage - Max (Bootstrap) | 650V |
| RoHS Status | RoHS Compliant |
IXA531L4 Overview
A higher degree of flexibility is achieved by adopting its 44-LCC (J-Lead) package.A packaging method of Tape & Reel (TR) is indicated.Gate drivers is configured wGate driversh 6 drivers.Gate drivers is mounted in the way of Surface Mount.When the supply voltage is set to 8V~35V, it can demonstrate its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.-40°C~125°C TJ is the allowed temperature range for this device.The input type is Inverting.Initially, the configuration is composed of 44 terminations.There are various related parts under its base part number IXA531.In this case, Surface Mount indicates how the device is mounted.During design, it is configured with 44 pins.With a supply voltage of 15V, it is designed to operate.There is a maximum output current of 600mA.The number of component pins is 44.Ideally, the high-side voltage should not exceed 650V.The basis of the model has 3 outputs integrated.An output current of 600mA is supported.2W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.
IXA531L4 Features
Embedded in the Tape & Reel (TR) package
6 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
44 pins
High-side voltage - Max (Bootstrap) of 650V
Maximum power dissipation of 2W
IXA531L4 Applications
There are a lot of IXYS IXA531L4 gate drivers applications.
- Telecom switch mode power supplies
- Video amplifiers
- Digitally controlled power supplies
- RGB applications
- Pulse transformer drivers
- AC-DC Inverters
- Motor controllers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Topologies
- Solar inverters
