IXBD4410PI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| Series | ISOSMART™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 600mW |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXBD4410 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Output Current | 2A |
| Input Type | Non-Inverting |
| Rise Time | 100ns |
| Fall Time (Typ) | 150 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 3.65V |
| High Side Voltage - Max (Bootstrap) | 1200V |
| Height Seated (Max) | 3.556mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXBD4410PI Overview
There is greater flexibility with the 16-DIP (0.300, 7.62mm) package.Gate drivers is package in Tube case.Configuration is supported by 1 drivers.Through Hole is the way in which it is mounted.In the absence of a 10V~20V supply voltage, its superiority can be demonstrated.Gate type IGBT, N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Non-Inverting is used as the input type in this program.There are 16 terminations to form the base of its configuration.Under its base part number IXBD4410, various related parts can be found.The mount method is Through Hole.In the device, there are 16 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 15V.Mosfet driver is equipped wMosfet driverh an interface chip HALF BRIDGE BASED MOSFET DRIVER.Components with 16 pins are available.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 1200V.Mosfet gate drivers supports a current output of 2A.Based on the maximum power dissipation of 600mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.Mosfet gate drivers is recommended that you set the operating supply voltage to 20V.There are several gate drivers in the ISOSMART? series, including this one.
IXBD4410PI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 1200V
Maximum power dissipation of 600mW
Operating with the supply voltage of ISOSMART?
IXBD4410PI Applications
There are a lot of IXYS IXBD4410PI gate drivers applications.
- Industrial motor drives - compact, standard, premium, servo drives
- Industrial Modules
- Portable computers
- LCD/LCoS/DLP portable and embedded pico projectors
- Solar inverters
- Portable Media Players
- Uninterruptible Power Supplies (UPS)
- Line drivers
- 3-Phase Motor Inverter Driver
- UPS systems
