IXBD4410SI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Weight | 550.009098mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2001 |
| Series | ISOSMART™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 600mW |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXBD4410 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Output Current | 2A |
| Input Type | Non-Inverting |
| Rise Time | 100ns |
| Fall Time (Typ) | 150 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 3.65V |
| High Side Voltage - Max (Bootstrap) | 1200V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXBD4410SI Overview
For greater flexibility, its 16-SOIC (0.295, 7.50mm Width) package is used.Tube is the form of the package.This device is equipped with 1 drivers for its configuration.Ideally, it should be mounted in the direction of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 10V~20V.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.This program uses the input type of Non-Inverting.Mosfet driver is based on 16 terminations.There are various parts that can be found under its base part number IXBD4410.Mounting the device requires Surface Mount.In order to operate, a voltage of 15V has to be applied.The interface IC of the device is HALF BRIDGE BASED MOSFET DRIVER.The component has 16 pins.Maximum (Bootstrap) voltage can be up to 1200V.The device is capable of delivering a current of 2A.Based on the maximum power dissipation of 600mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 20V.A gate driver in this series is included in the ISOSMART? series.
IXBD4410SI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
High-side voltage - Max (Bootstrap) of 1200V
Maximum power dissipation of 600mW
Operating with the supply voltage of ISOSMART?
IXBD4410SI Applications
There are a lot of IXYS IXBD4410SI gate drivers applications.
- Multicolor LED/laser displays
- Industrial Power Supplies
- AC-DC Inverters
- Portable computers
- General Purpose 3-Phase Inverter
- Active filtering
- High-speed communications
- Industrial Modules
- Motor Controls
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
