IXBD4411PI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2001 |
| Series | ISOSMART™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 600mW |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXBD4411 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Output Current | 2A |
| Input Type | Non-Inverting |
| Rise Time | 100ns |
| Fall Time (Typ) | 150 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 3.65V |
| High Side Voltage - Max (Bootstrap) | 1200V |
| Height Seated (Max) | 3.556mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXBD4411PI Overview
Gate drivers provides greater flexibilGate driversy to use the 16-DIP (0.300, 7.62mm) package.The packaging method is indicated by Tube.This device is equipped with 1 drivers for its configuration.Through Hole is mounted in the way of the device.A supply voltage of 10V~20V demonstrates its superiority.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.Temperature range -40°C~150°C TJ is allowed for this device.A type of Non-Inverting is used for input in this program.Its configuration is based on a total of 16 terminations.The base part number IXBD4411 refers to a number of related parts.Devices are mounted by Through Hole.When designing, the device is configured with 16 pins.The device is specifically designed to operate at 15V volts.The interface chip of the system is HALF BRIDGE BASED MOSFET DRIVER.A board with 16 component pins is available.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 1200V.This device supports a current output of 2A at the output.Using 600mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 20V.A gate driver in the ISOSMART? series is included in this document.
IXBD4411PI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 1200V
Maximum power dissipation of 600mW
Operating with the supply voltage of ISOSMART?
IXBD4411PI Applications
There are a lot of IXYS IXBD4411PI gate drivers applications.
- Digitally controlled power supplies
- Refrigerator
- LCD/LCoS/DLP portable and embedded pico projectors
- Portable Navigation Devices
- Dual-Battery Systems
- RGB applications
- Portable computers
- 3-Phase Motor Inverter Driver
- Pulse transformer drivers
- High-speed communications
