IXDD404PI
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 599.989307mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~35V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXD*404 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 35V |
| Nominal Supply Current | 3mA |
| Output Current | 4A |
| Input Type | Non-Inverting |
| Rise Time | 18ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 16ns 13ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.059 μs |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height Seated (Max) | 4.57mm |
| Length | 9.59mm |
| RoHS Status | RoHS Compliant |
IXDD404PI Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.A packaging method of Tube is used.A total of 2 drivers are integrated into its configuration.Its recommended mounting way is Through Hole.In the absence of a 4.5V~35V supply voltage, its superiority can be demonstrated.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.There is a temperature range for this device of -55°C~150°C TJ.Non-Inverting is used as the input type.Initially, the configuration is composed of 8 terminations.You will find various related parts under the base part number IXD*404.The mount method is Through Hole.When the device is designed, it has 8 pins.The device is specifically designed to operate at 18V volts.As its interface IC, BUFFER OR INVERTER BASED PERIPHERAL DRIVER is being employed.Several electronic components are included in its subcategory of MOSFET Drivers.On the board, there are 8 component pins.Mosfet gate drivers can deliver a current of 4A.Mosfet gate drivers is recommended that 35V be set as the operating supply voltage.
IXDD404PI Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDD404PI Applications
There are a lot of IXYS IXDD404PI gate drivers applications.
- PCMCIA applications
- Refrigerator
- Industrial Modules
- Motor controllers
- High current laser/LED systems
- High-voltage isolated DC-DC converters
- High-speed communications
- High power buffers
- Motor Control
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
