IXDD404SIA-16
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~35V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXD*404 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 35V |
| Nominal Supply Current | 3mA |
| Output Current | 4A |
| Input Type | Non-Inverting |
| Rise Time | 18ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 16ns 13ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.059 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
IXDD404SIA-16 Overview
A higher degree of flexibility is achieved by adopting its 16-SOIC (0.295, 7.50mm Width) package.A package of Tube has been used.For its configuration, it incorporates 2 drivers.Its recommended mounting way is Surface Mount.When the supply voltage is 4.5V~35V it is able to demonstrate its superiority.This gate type has a IGBT, N-Channel, P-Channel MOSFET design.-55°C~150°C TJ is the allowed temperature range for this device.The input type is Non-Inverting.The configuration is based on 16 terminations.The base part number IXD*404 refers to a number of related parts.The device is mounted using Surface Mount.When the device is designed, it has 16 pins.The device is specifically designed to operate at 18V volts.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED PERIPHERAL DRIVER.A board with 16 component pins is available.Mosfet gate drivers can deliver a current of 4A.Setting the operating supply voltage to 35V is recommended.
IXDD404SIA-16 Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
16 pins
IXDD404SIA-16 Applications
There are a lot of IXYS IXDD404SIA-16 gate drivers applications.
- White Goods - Air Conditioner, Washing Machine,
- Isolated Gate Driver Supplies
- Commercial and agricultural vehicles (CAV)
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Solar inverters
- Industrial Power Supplies
- Telecom switch mode power supplies
- 3-Phase Motor Inverter Driver
- Uninterruptible Power Supplies (UPS)
- Active filtering
