IXDD404SIA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 449.991981mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Technology | MOS |
| Voltage - Supply | 4.5V~35V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*404 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 4A |
| Nominal Supply Current | 3mA |
| Output Current | 4A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 18ns |
| Fall Time (Typ) | 17 ns |
| Turn-Off Delay Time | 39 ns |
| Rise / Fall Time (Typ) | 16ns 13ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.059 µs |
| Built-in Protections | OVER CURRENT |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXDD404SIA Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Tube is the form of the package.Configuration is based on 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 4.5V~35V supply voltage, it can demonstrate its superiority.This device is designed with a IGBT, N-Channel, P-Channel MOSFET gate type.There is a temperature range for this device of -55°C~150°C TJ.Non-Inverting is used as the input type in this program.It's configured with 8 terminations.The base part number IXD*404 refers to a number of related parts.Devices are mounted by Surface Mount.The pins are configured with 8 when designing the chip.The device is specifically designed to function with a supply voltage of 18V V.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED PERIPHERAL DRIVER.In the maximum case, the output current can be 4A volts.There are various useful electronic components in its subcategory MOSFET Drivers.Components with 8 pins are available.The output current supported by the device is 4A.
IXDD404SIA Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDD404SIA Applications
There are a lot of IXYS IXDD404SIA gate drivers applications.
- Video amplifiers
- Isolated Supplies for Motor Control
- Isolated Supplies for controller area network (CAN),
- Motor Controls
- Isolated switch mode power supplies (SMPS)
- Motor Drives
- Isolated Gate Driver Supplies
- Dual-Battery Systems
- Head-up and Head mounted displays
- Pulse transformer drivers
