Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
TO-220-5 |
Number of Pins |
5 |
Weight |
3.000003g |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2001 |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
Not Applicable |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
17W |
Voltage - Supply |
4.5V~25V |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
18V |
Time@Peak Reflow Temperature-Max (s) |
35 |
Base Part Number |
IXD*408 |
Pin Count |
3 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
25V |
Nominal Supply Current |
3mA |
Output Current |
8A |
Input Type |
Non-Inverting |
Rise Time |
18ns |
Fall Time (Typ) |
19 ns |
Rise / Fall Time (Typ) |
14ns 15ns |
Interface IC Type |
BUFFER OR INVERTER BASED MOSFET DRIVER |
Channel Type |
Single |
Number of Drivers |
1 |
Turn On Time |
0.042 µs |
Output Peak Current Limit-Nom |
8A |
Driven Configuration |
Low-Side |
Gate Type |
IGBT, N-Channel, P-Channel MOSFET |
Current - Peak Output (Source, Sink) |
8A 8A |
High Side Driver |
YES |
Logic Voltage - VIL, VIH |
0.8V 3.5V |
Turn Off Time |
0.038 µs |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
IXDD408CI Overview
For greater flexibility, its TO-220-5 package is used.A packaging method of Tube is used.The configuration is supported by 1 drivers.It's mounted on the way to Through Hole.WGate driversh a 4.5V~25V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate type IGBT, N-Channel, P-Channel MOSFET is designed for it.Temperature range -40°C~150°C TJ is allowed for this device.Mosfet driver uses Non-Inverting as Mosfet drivers input type.There are 5 terminations to form the base of its configuration.Mosfet driver contains a variety of related parts under Mosfet drivers base part number IXD*408.The mount method is Through Hole.When the device is designed, it has 5 pins.The device is specifically designed to operate at 18V volts.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.The board has a total of 3 component pins.The device is capable of delivering a current of 8A.According to its maximum power dissipation, 17W is capable of conducting and transferring a large amount of power without overheating.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 25V.
IXDD408CI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
5 pins
Maximum power dissipation of 17W
IXDD408CI Applications
There are a lot of IXYS IXDD408CI gate drivers applications.
- Industrial Power Supplies
- Telecom switch mode power supplies
- Commercial air-conditioning (CAC)
- Portable Navigation Devices
- Welding
- 3-Phase Motor Inverter Driver
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Solar inverters
- DC/DC converters
- serial peripheral interface (SPI), I2C