banner_page

IXDD408PI

Through Hole Tube Obsolete EAR99 Gate Drivers ICs Non-Inverting 1 8-DIP (0.300, 7.62mm) IXD*408 Low-Side


  • Manufacturer: IXYS
  • Nocochips NO: 401-IXDD408PI
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 964
  • Description: Through Hole Tube Obsolete EAR99 Gate Drivers ICs Non-Inverting 1 8-DIP (0.300, 7.62mm) IXD*408 Low-Side (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Weight 599.989307mg
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2001
Part Status Obsolete
Moisture Sensitivity Level (MSL) Not Applicable
Number of Terminations 8
ECCN Code EAR99
Subcategory MOSFET Drivers
Max Power Dissipation 975mW
Technology CMOS
Voltage - Supply 4.5V~25V
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 18V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number IXD*408
Pin Count 8
Qualification Status Not Qualified
Operating Supply Voltage 25V
Nominal Supply Current 3mA
Output Current 8A
Input Type Non-Inverting
Rise Time 18ns
Fall Time (Typ) 19 ns
Rise / Fall Time (Typ) 14ns 15ns
Interface IC Type BUFFER OR INVERTER BASED MOSFET DRIVER
Channel Type Single
Number of Drivers 1
Turn On Time 0.042 µs
Output Peak Current Limit-Nom 8A
Driven Configuration Low-Side
Gate Type IGBT, N-Channel, P-Channel MOSFET
Current - Peak Output (Source, Sink) 8A 8A
High Side Driver YES
Logic Voltage - VIL, VIH 0.8V 3.5V
Height Seated (Max) 4.57mm
Length 9.59mm
Width 7.62mm
RoHS Status RoHS Compliant
Lead Free Lead Free

IXDD408PI Overview


The 8-DIP (0.300, 7.62mm) package offers greater flexibility.Tube represents the packaging method.A total of 1 drivers are integrated into its configuration.Through Hole is mounted in the way.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~25V supply voltage.A gate type of IGBT, N-Channel, P-Channel MOSFET has been used in its design.Temperature range -40°C~150°C TJ is allowed for this device.Non-Inverting is used as its input type.As a result of its configuration, it contains a maximum of 8 terminations.Numerous related parts are available for its base part number IXD*408.The mount method is Through Hole.The pins are configured with 8 when designing the chip.This device operates with 18V supply voltage.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.Components with 8 pins are available.The device is capable of delivering a current of 8A.Based on the maximum power dissipation of 975mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.Mosfet gate drivers is recommended that the operating supply voltage be set to 25V volts.

IXDD408PI Features


Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 975mW

IXDD408PI Applications


There are a lot of IXYS IXDD408PI gate drivers applications.

  • RGB applications
  • Refrigerator
  • Smart Phones
  • Solar power supplies
  • General Purpose 3-Phase Inverter
  • AC-DC Inverters
  • Dual-Battery Systems
  • Commercial and agricultural vehicles (CAV)
  • Topologies
  • Line drivers

Write a review

Note: HTML is not translated!
    Bad           Good