IXDD409PI
| Parameters | |
|---|---|
| Turn On Delay Time | 40 ps |
| Rise Time | 15ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 3.5V |
| Turn Off Time | 0.036 µs |
| Height Seated (Max) | 4.57mm |
| Length | 9.59mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 599.989307mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 4.5V~35V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXD*409 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 9A |
| Nominal Supply Current | 3mA |
| Output Current | 9A |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
IXDD409PI Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.A package of Tube has been used.Configuration is supported by 1 drivers.In the direction of Through Hole, gate drivers is mounted.WGate driversh a 4.5V~35V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate type IGBT, N-Channel, P-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -55°C~150°C TJ.The input type is Non-Inverting.Mosfet driver is based on 8 terminations.The base part number IXD*409 refers to a number of related parts.Devices are mounted by Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.The device is specifically designed to function with a supply voltage of 18V V.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.There is a maximum output current of 9A that can be achieved.There are 8 component pins on the board.The output current of this device can be set to 9A.
IXDD409PI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDD409PI Applications
There are a lot of IXYS IXDD409PI gate drivers applications.
- Isolated Supplies for Motor Control
- General Purpose 3-Phase Inverter
- UPS systems
- Refrigerator
- Industrial motor drives - compact, standard, premium, servo drives
- Topologies
- Smart Phones
- A/D drivers
- 3-Phase Motor Inverter Driver
- Solar power supplies
