IXDD409YI
| Parameters | |
|---|---|
| Operating Supply Voltage | 35V |
| Nominal Supply Current | 3mA |
| Output Current | 9A |
| Input Type | Non-Inverting |
| Rise Time | 15ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 3.5V |
| Turn Off Time | 0.036 µs |
| Height Seated (Max) | 4.8mm |
| Length | 9.975mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Weight | 1.59999g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Voltage - Supply | 4.5V~35V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | IXD*409 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G5 |
| Qualification Status | Not Qualified |
IXDD409YI Overview
For greater flexibility, the TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package is adopted.A packaging method of Tube is indicated.For its configuration, it incorporates 1 drivers.In the direction of Surface Mount, gate drivers is mounted.In the absence of a power supply voltage of 4.5V~35V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a IGBT, N-Channel, P-Channel MOSFET gate.This device is allowed to operate in a temperature range of -55°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.There are 5 terminations to form the base of its configuration.Numerous related parts can be found under its base part number IXD*409.Mosfet driver is mounted using the Surface Mount method.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 18V.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.4 pins are present on the component.The output current of this device can be set to 9A.As a rule of thumb, the operating supply voltage should be set to 35V.
IXDD409YI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
IXDD409YI Applications
There are a lot of IXYS IXDD409YI gate drivers applications.
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Motor Controls
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated switch mode power supplies (SMPS)
- High current laser/LED systems
- General Purpose 3-Phase Inverter
- Topologies
- White Goods - Air Conditioner, Washing Machine,
- High-voltage isolated DC-DC converters
- Welding
