IXDD414SI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 449.991981mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~35V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*414 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Max Output Current | 14A |
| Nominal Supply Current | 3mA |
| Power Dissipation | 1W |
| Output Current | 14A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 33 ns |
| Rise Time | 29ns |
| Fall Time (Typ) | 26 ns |
| Turn-Off Delay Time | 34 ns |
| Rise / Fall Time (Typ) | 25ns 22ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 33 μs |
| Output Peak Current Limit-Nom | 14A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 14A 14A |
| Logic Voltage - VIL, VIH | 0.8V 3.5V |
| Turn Off Time | 34 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXDD414SI Overview
A higher level of flexibility is provided by its 14-SOIC (0.154, 3.90mm Width) package.Gate drivers is package in Tube case.Gate drivers is configured wGate driversh 1 drivers.In the direction of Surface Mount, gate drivers is mounted.In the absence of a 4.5V~35V supply voltage, its superiority can be demonstrated.This gate type has a IGBT, N-Channel, P-Channel MOSFET design.In this device, temperatures must not exceed -55°C~150°C TJ.This program uses the input type of Non-Inverting.14 terminations constitute its foundation.Numerous related parts can be found under its base part number IXD*414.You mount it with Surface Mount.At the time of design, it is configured with 14 pins.Mosfet driver is designed specifically to run on 18V volts of power.The interface IC is referred to as BUFFER OR INVERTER BASED PERIPHERAL DRIVER.There is an output current limit of 14A for this device.On the board, there are 14 component pins.Mosfet gate drivers can deliver a current of 14A.Based on the maximum power dissipation of 1W, it is clear that it is capable of transferring and conducting power losses without becoming overheated.
IXDD414SI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
14 pins
Maximum power dissipation of 1W
IXDD414SI Applications
There are a lot of IXYS IXDD414SI gate drivers applications.
- Motor Drives
- Line drivers
- Commercial air-conditioning (CAC)
- Industrial Modules
- Industrial Motor Inverter - Power Tools, Robotics
- High current laser/LED systems
- Industrial Power Supplies
- Digitally controlled power supplies
- Smart Phones
- Uninterruptible Power Supplies (UPS)
