IXDD414YI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Weight | 1.59999g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 12.5W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~35V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*414 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G5 |
| Qualification Status | Not Qualified |
| Max Output Current | 14A |
| Nominal Supply Current | 3mA |
| Power Dissipation | 12.5W |
| Output Current | 14A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 33 ns |
| Rise Time | 29ns |
| Fall Time (Typ) | 26 ns |
| Turn-Off Delay Time | 34 ns |
| Rise / Fall Time (Typ) | 25ns 22ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 33 μs |
| Output Peak Current Limit-Nom | 14A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 14A 14A |
| Logic Voltage - VIL, VIH | 0.8V 3.5V |
| Turn Off Time | 34 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE |
| Height Seated (Max) | 4.8mm |
| Length | 9.975mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXDD414YI Overview
A higher level of flexibility is provided by its TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package.Gate drivers is package in Tube case.For its configuration, it incorporates 1 drivers.Surface Mount is the way in which it is mounted.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~35V.Gate type IGBT, N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -55°C~150°C TJ.Non-Inverting is used as the input type in this program.Its configuration is based on a total of 5 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number IXD*414.Mounting the device requires Surface Mount.In addition, it is specifically designed to operate with a supply voltage of 18V.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED PERIPHERAL DRIVER.An output current as high as 14A can be achieved at maximum power.There are various useful electronic components in its subcategory MOSFET Drivers.The board contains 4 pins for component connections.An output current of 14A is supported.This device has a maximum power dissipation of 12.5W, indicating that it is capable of reducing power loss without overheating.
IXDD414YI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
Maximum power dissipation of 12.5W
IXDD414YI Applications
There are a lot of IXYS IXDD414YI gate drivers applications.
- DC/DC converters
- High frequency line drivers
- Head-up and Head mounted displays
- RGB applications
- High-voltage isolated DC-DC converters
- A/D drivers
- Broadcast equipment
- Telecom switch mode power supplies
- LCD/LCoS/DLP portable and embedded pico projectors
- Solar inverters
