IXDD430MYI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Weight | 1.59999g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Bulk |
| Published | 2005 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 2W |
| Voltage - Supply | 8.5V~35V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*430 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 35V |
| Nominal Supply Current | 3mA |
| Output Current | 30A |
| Input Type | Non-Inverting |
| Rise Time | 20ns |
| Fall Time (Typ) | 18 ns |
| Rise / Fall Time (Typ) | 18ns 16ns |
| Interface IC Type | BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 µs |
| Output Peak Current Limit-Nom | 30A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 30A 30A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 3.5V |
| Turn Off Time | 0.039 µs |
| Height Seated (Max) | 4.8mm |
| Length | 9.975mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXDD430MYI Overview
For greater flexibility, the TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package is adopted.Bulk represents the package.For its configuration, it incorporates 1 drivers.The device is mounted in the direction of Surface Mount.In the absence of a 8.5V~35V supply voltage, it can demonstrate its superiority.Gate type IGBT, N-Channel, P-Channel MOSFET has been used in its design.There is a temperature range for this device of -55°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Initially, the configuration is composed of 5 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number IXD*430.The mount method is Surface Mount.The device is specifically designed to operate at 18V volts.There is an interface IC called BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER that is employed in this device.The number of component pins is 4.The output current supported by the device is 30A.Its maximum power dissipation of 2W also demonstrates its maximum ability to transfer power without overheating.As a rule of thumb, the operating supply voltage should be set to 35V.
IXDD430MYI Features
Embedded in the Bulk package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
Maximum power dissipation of 2W
IXDD430MYI Applications
There are a lot of IXYS IXDD430MYI gate drivers applications.
- Isolated Gate Driver Supplies
- Power factor correction (PFC) circuits
- Industrial Modules
- Smart Phones
- Isolated Supplies for controller area network (CAN),
- Commercial and agricultural vehicles (CAV)
- High current laser/LED systems
- Head-up and Head mounted displays
- Topologies
- UPS systems
