Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) Exposed Pad |
Number of Pins |
8 |
Supplier Device Package |
8-SOIC-EP |
Weight |
540.001716mg |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
Published |
2010 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Voltage - Supply |
4.5V~35V |
Number of Outputs |
2 |
Max Output Current |
4A |
Number of Channels |
2 |
Max Supply Voltage |
35V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
10μA |
Output Current |
4A |
Propagation Delay |
40 ns |
Input Type |
Non-Inverting |
Turn On Delay Time |
50 ns |
Rise Time |
16ns |
Fall Time (Typ) |
14 ns |
Rise / Fall Time (Typ) |
9ns 8ns |
Channel Type |
Independent |
Number of Drivers |
2 |
Driven Configuration |
Low-Side |
Gate Type |
IGBT, N-Channel, P-Channel MOSFET |
Current - Peak Output (Source, Sink) |
4A 4A |
Logic Voltage - VIL, VIH |
0.8V 3V |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
IXDD604SI Overview
Its 8-SOIC (0.154, 3.90mm Width) Exposed Pad package provides greater flexibility.Gate drivers is package in Tube case.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.In this case, gate drivers is mounted along the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~35V supply voltage.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.Temperature range -40°C~125°C TA is allowed for this device.Non-Inverting is used as its input type.Surface Mount is the way it takes to mount the device.When designing, the device is configured with 8 pins.An output current as high as 4A can be achieved at maximum power.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.Mosfet driver supports an output current of 4A.There is a maximum operating temperature of 125°C.There is a minimum operating temperature of -40°C.In order for the device to operate, the supply voltage must be 35V.The supply voltage of 4.5V is its minimum value for operation.During operation, a voltage of 10μA is applied to the power supply.Mosfet gate drivers is configured wMosfet gate driversh 2 channels for operation.
IXDD604SI Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDD604SI Applications
There are a lot of IXYS Integrated Circuits Division IXDD604SI gate drivers applications.
- 3-Phase Motor Inverter Driver
- Topologies
- Pulse transformer drivers
- Portable Navigation Devices
- serial peripheral interface (SPI), I2C
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Portable computers
- Motor controllers
- Isolated Gate Driver Supplies
- Motor Drives