IXDD609PI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-DIP |
| Weight | 2.26799g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~35V |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Number of Channels | 1 |
| Max Supply Voltage | 35V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 10μA |
| Output Current | 2A |
| Propagation Delay | 30 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 22ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 22ns 15ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IXDD609PI Overview
Its 8-DIP (0.300, 7.62mm) package provides greater flexibility.A package of Tube has been used.Gate drivers is configured wGate driversh 1 drivers.Its recommended mounting way is Through Hole.WGate driversh a 4.5V~35V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.Mosfet driver is possible to use this device at temperatures as low as -55°C~150°C TJ.This program uses the input type of Non-Inverting.Mosfet driver is mounted using the Through Hole method.The pins are configured with 8 when designing the chip.As a maximum, there is 2A limit to the output current.The basis of the model has 1 outputs integrated.Mosfet gate drivers can deliver a current of 2A.The allowable maximum value of operating temperature is 125°C.There is a minimum operating temperature of -40°C.In order for the device to operate, the supply voltage must be 35V.Its minimum operating voltage is 4.5V.The supply voltage of this device is 10μA and it operates with that voltage.Operation of the device is limited to 1 channels.
IXDD609PI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDD609PI Applications
There are a lot of IXYS Integrated Circuits Division IXDD609PI gate drivers applications.
- Motor Drives
- RGB applications
- Isolated Supplies for controller area network (CAN),
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Industrial Motor Inverter - Power Tools, Robotics
- A/D drivers
- Isolated switch mode power supplies (SMPS)
- Broadcast equipment
- UPS systems
- LCD/LCoS/DLP portable and embedded pico projectors
