IXDD609SIA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Weight | 540.001716mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~35V |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Number of Channels | 1 |
| Max Supply Voltage | 35V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 10μA |
| Output Current | 2A |
| Propagation Delay | 30 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 22ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 22ns 15ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IXDD609SIA Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.There is a package in the form of Tube.For its configuration, it incorporates 1 drivers.Gate drivers is mounted in the way of Surface Mount.By using 4.5V~35V supply voltage, it is able to demonstrate its superiority.IGBT, N-Channel, P-Channel MOSFET is the gate type used for this design.For this device, the temperature range is -55°C~150°C TJ.A type of Non-Inverting is used for input in this program.You mount it with Surface Mount.The pins are configured with 8 when designing the chip.There is a maximum output current of 2A that can be achieved.The basis has 1 integrated outputs.Mosfet gate drivers can deliver a current of 2A.Operating temperatures cannot exceed 125°C.Temperatures below -40°C are allowable as a minimum.When the supply voltage is 35V, it is at its maximum operation.This device is designed to operate with a voltage of 4.5V.During operation, a voltage of 10μA is applied to the power supply.The operation channel configuration is 1.
IXDD609SIA Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDD609SIA Applications
There are a lot of IXYS Integrated Circuits Division IXDD609SIA gate drivers applications.
- Isolated Supplies for Motor Control
- Telecom switch mode power supplies
- High frequency line drivers
- High power buffers
- General Purpose 3-Phase Inverter
- Topologies
- Industrial motor drives - compact, standard, premium, servo drives
- Automotive Applications
- Motor Controls
- High-voltage isolated DC-DC converters
