Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) Exposed Pad |
Number of Pins |
8 |
Supplier Device Package |
8-SOIC-EP |
Operating Temperature |
-55°C~150°C TJ |
Packaging |
Tube |
Published |
2011 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Voltage - Supply |
4.5V~35V |
Number of Outputs |
1 |
Max Output Current |
14A |
Number of Channels |
1 |
Max Supply Voltage |
35V |
Min Supply Voltage |
4.5V |
Propagation Delay |
70 ns |
Input Type |
Non-Inverting |
Turn On Delay Time |
70 ns |
Rise Time |
35ns |
Fall Time (Typ) |
25 ns |
Rise / Fall Time (Typ) |
25ns 18ns |
Channel Type |
Single |
Number of Drivers |
1 |
Driven Configuration |
Low-Side |
Gate Type |
IGBT, N-Channel, P-Channel MOSFET |
Current - Peak Output (Source, Sink) |
14A 14A |
Logic Voltage - VIL, VIH |
0.8V 3V |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
IXDD614SI Overview
Its 8-SOIC (0.154, 3.90mm Width) Exposed Pad package is adopted for higher flexibility.A packaging method of Tube is used.Configuration is supported by 1 drivers.In this case, gate drivers is mounted along the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~35V supply voltage.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.For this device, the temperature range is -55°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Devices are mounted by Surface Mount.A total of 8 pins are available on the device.There is a maximum output current of 14A that can be achieved.For its basis, 1 outputs are integrated.There is a maximum operating temperature of 125°C.Mosfet gate drivers is permissible to operate at a minimum temperature of -40°C.For operation, the supply voltage of 35V is the maximum value.In order for the device to function, the supply voltage must be set to 4.5V.Mosfet driver ic has a configuration of 1 channels.
IXDD614SI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDD614SI Applications
There are a lot of IXYS Integrated Circuits Division IXDD614SI gate drivers applications.
- DC-DC Converters
- High-voltage isolated DC-DC converters
- Motor Drives
- Welding
- Industrial Power Supplies
- Smart Phones
- Refrigerator
- Motor Control
- Multicolor LED/laser displays
- 3-Phase Motor Inverter Driver