banner_page

IXDD630CI

Through Hole Tube Active Gate Drivers ICs Non-Inverting 1 TO-220-5 Low-Side


  • Manufacturer: IXYS Integrated Circuits Division
  • Nocochips NO: 415-IXDD630CI
  • Package: TO-220-5
  • Datasheet: -
  • Stock: 540
  • Description: Through Hole Tube Active Gate Drivers ICs Non-Inverting 1 TO-220-5 Low-Side (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case TO-220-5
Supplier Device Package TO-220-5
Weight 3.000003g
Operating Temperature -55°C~150°C TJ
Packaging Tube
Published 2014
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Voltage - Supply 12.5V~35V
Number of Outputs 1
Output Voltage 12.5V
Max Output Current 30A
Number of Channels 1
Max Supply Voltage 35V
Min Supply Voltage 12.5V
Operating Supply Current 10μA
Output Current 30A
Propagation Delay 65 ns
Input Type Non-Inverting
Turn On Delay Time 100 ns
Rise Time 11ns
Fall Time (Typ) 11 ns
Turn-Off Delay Time 100 ns
Rise / Fall Time (Typ) 11ns 11ns
Channel Type Single
Number of Drivers 1
Driven Configuration Low-Side
Gate Type IGBT, N-Channel, P-Channel MOSFET
Current - Peak Output (Source, Sink) 30A 30A
Logic Voltage - VIL, VIH 0.8V 3.5V
RoHS Status ROHS3 Compliant

IXDD630CI Overview


The TO-220-5 package offers greater flexibility.Tube represents the package.Gate drivers is configured wGate driversh 1 drivers.Through Hole is the way in which it is mounted.When the supply voltage is 12.5V~35V it is able to demonstrate its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.In this device, temperatures must not exceed -55°C~150°C TJ.Non-Inverting is used as the input type.The device is mounted with Through Hole.The maximum output current can amount to 30A.The basis of this system consists of 1 outputs.Mosfet gate drivers can deliver a current of 30A.Mosfet gate drivers is permissible to operate at a temperature of 125°C.Temperatures below -40°C are allowed as the minimum.When the supply voltage is 35V, it is at its maximum operation.In order for the device to operate, a supply voltage of 12.5V must be applied.When this voltage is produced, it is marked as 12.5V.Powered by 10μA volts, it operates on a constant current.Operation is configured with 1 channels.

IXDD630CI Features


Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET

IXDD630CI Applications


There are a lot of IXYS Integrated Circuits Division IXDD630CI gate drivers applications.

  • Portable Navigation Devices
  • UPS systems
  • Automotive Applications
  • Video amplifiers
  • High power buffers
  • High current laser/LED systems
  • Motor controllers
  • Isolated Supplies for controller area network (CAN),
  • Pulse transformer drivers
  • High frequency line drivers

Write a review

Note: HTML is not translated!
    Bad           Good