IXDD630MYI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Supplier Device Package | TO-263-5 |
| Weight | 1.59999g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 9V~35V |
| Number of Outputs | 1 |
| Output Voltage | 9V |
| Max Output Current | 30A |
| Number of Channels | 1 |
| Max Supply Voltage | 35V |
| Min Supply Voltage | 9V |
| Operating Supply Current | 10μA |
| Output Current | 30A |
| Propagation Delay | 65 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Rise Time | 11ns |
| Fall Time (Typ) | 11 ns |
| Turn-Off Delay Time | 100 ns |
| Rise / Fall Time (Typ) | 11ns 11ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 30A 30A |
| Logic Voltage - VIL, VIH | 0.8V 3.5V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IXDD630MYI Overview
Gate drivers provides greater flexibilGate driversy to use the TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package.Tube is the packaging method.This device is equipped with 1 drivers for its configuration.Gate drivers is mounted in the way of Surface Mount.By using 9V~35V supply voltage, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel, P-Channel MOSFET.There is a temperature range for this device of -55°C~150°C TJ.Input type of Non-Inverting is used.Mounting the device requires Surface Mount.In the maximum case, the output current can be 30A volts.The basis has 1 integrated outputs.The output current can be set to 30A.Temperatures greater than 125°C are not allowed.Temperatures below -40°C are allowable as a minimum.In order for the device to operate, the supply voltage must be 35V.A minimum supply voltage of 9V is required for operation.9V is the output voltage.Mosfet gate drivers operates wMosfet gate driversh the supply voltage of 10μA.The operation channel configuration is 1.
IXDD630MYI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
IXDD630MYI Applications
There are a lot of IXYS Integrated Circuits Division IXDD630MYI gate drivers applications.
- White Goods - Air Conditioner, Washing Machine,
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Smart Phones
- Uninterruptible Power Supplies (UPS)
- DC-DC Converters
- Pulse transformer drivers
- Solar inverters
- serial peripheral interface (SPI), I2C
- Refrigerator
- Automotive Applications
