IXDE504PI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Weight | 599.989307mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*504 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 20mA |
| Input Type | Inverting |
| Rise Time | 16ns |
| Fall Time (Typ) | 14 ns |
| Rise / Fall Time (Typ) | 9ns 8ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.6 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Turn Off Time | 0.59 μs |
| Height Seated (Max) | 4.57mm |
| Length | 9.59mm |
| RoHS Status | RoHS Compliant |
IXDE504PI Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.A packaging method of Tube is used.Configuration is supported by 2 drivers.In the direction of Through Hole, gate drivers is mounted.A supply voltage of 4.5V~30V demonstrates its superiority.Gate type IGBT, N-Channel, P-Channel MOSFET is designed for it.This device is allowed to operate in a temperature range of -55°C~150°C TJ.A type of Inverting is used for input in this program.Mosfet driver is based on 8 terminations.There are numerous related parts listed under its base part number IXD*504.The mount method is Through Hole.In order to operate, a voltage of 18V has to be applied.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.There are several useful electronic components in this subcategory of MOSFET Drivers.On the board, there are 8 component pins.Using its power supply of 4.5/30V, it provides solutions to diverse power supply problems.
IXDE504PI Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
IXDE504PI Applications
There are a lot of IXYS IXDE504PI gate drivers applications.
- Motor Controls
- Head-up and Head mounted displays
- Isolated Gate Driver Supplies
- Solar power supplies
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Line drivers
- High frequency line drivers
- Active filtering
- 3-Phase Motor Inverter Driver
- Portable computers
