IXDF404SI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 449.991981mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Technology | MOS |
| Voltage - Supply | 4.5V~35V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*404 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 4A |
| Nominal Supply Current | 3mA |
| Output Current | 4A |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 18ns |
| Fall Time (Typ) | 17 ns |
| Turn-Off Delay Time | 39 ns |
| Rise / Fall Time (Typ) | 16ns 13ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.059 μs |
| Built-in Protections | OVER CURRENT |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXDF404SI Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.Gate drivers is package in Tube case.The configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.A supply voltage of 4.5V~35V demonstrates its superiority.A gate type of IGBT, N-Channel, P-Channel MOSFET is used in its design.-55°C~150°C TJ is the allowed temperature range for this device.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.8 terminations constitute its foundation.Under its base part number IXD*404, various related parts can be found.The device is mounted using Surface Mount.During design, it is configured with 8 pins.Mosfet driver is designed specifically to run on 18V volts of power.In this case, BUFFER OR INVERTER BASED PERIPHERAL DRIVER serves as the interface IC.As a maximum, there is 4A limit to the output current.The board has a total of 8 component pins.This device is capable of delivering 4A current.
IXDF404SI Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDF404SI Applications
There are a lot of IXYS IXDF404SI gate drivers applications.
- Portable Navigation Devices
- Topologies
- High power buffers
- 3-Phase Motor Inverter Driver
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High frequency line drivers
- Isolated Supplies for Motor Control
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Solar power supplies
- High-voltage isolated DC-DC converters
