IXDF502SIA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 449.991981mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*502 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Operating Supply Voltage | 15V |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 3mA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 32 ns |
| Rise Time | 10ns |
| Fall Time (Typ) | 9 ns |
| Turn-Off Delay Time | 30 ns |
| Rise / Fall Time (Typ) | 7.5ns 6.5ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXDF502SIA Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Gate drivers is package in Tube case.This device is equipped with 2 drivers for its configuration.In this case, gate drivers is mounted along the way of Surface Mount.A supply voltage of 4.5V~30V demonstrates its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.This device is allowed to operate in a temperature range of -55°C~150°C TJ.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.Its configuration is based on a total of 8 terminations.Numerous related parts are available for its base part number IXD*502.The device is mounted using Surface Mount.When designing, the device is configured with 8 pins.In addition, it is specifically designed to operate with a supply voltage of 15V.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 2A limit to the output current.There are several useful electronic components within its subcategory MOSFET Drivers.There are 8 component pins on the board.Using its power supply of 4.5/30V, it provides solutions to diverse power supply problems.The operating supply voltage should be set at 15V.
IXDF502SIA Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDF502SIA Applications
There are a lot of IXYS IXDF502SIA gate drivers applications.
- General Purpose 3-Phase Inverter
- Industrial Power Supplies
- Multicolor LED/laser displays
- Isolated Supplies for controller area network (CAN),
- High frequency line drivers
- Portable computers
- Uninterruptible Power Supplies (UPS)
- Isolated Gate Driver Supplies
- Motor controllers
- Portable Navigation Devices
