IXDI404PI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 599.989307mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~35V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXD*404 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 4A |
| Nominal Supply Current | 3mA |
| Output Current | 4A |
| Input Type | Inverting |
| Rise Time | 18ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 16ns 13ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.059 µs |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height Seated (Max) | 4.57mm |
| Length | 9.59mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXDI404PI Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Tube represents the packaging method.Configuration is supported by 2 drivers.In this case, gate drivers is mounted along the way of Through Hole.A supply voltage of 4.5V~35V demonstrates its superiority.This gate type has a IGBT, N-Channel, P-Channel MOSFET design.-55°C~150°C TJ is the allowed temperature range for this device.Input type of Inverting is used.8 terminations constitute its foundation.You will find various related parts under the base part number IXD*404.Mounting the device requires Through Hole.A total of 8 pins are available on the device.In order to operate, a voltage of 18V has to be applied.The interface chip of the system is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.In the maximum case, the output current can be limited to 4A.A total of 8 pins are available for component connections.The device is capable of delivering a current of 4A.
IXDI404PI Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDI404PI Applications
There are a lot of IXYS IXDI404PI gate drivers applications.
- 3-Phase Motor Inverter Driver
- Motor Controls
- High-voltage isolated DC-DC converters
- RGB applications
- Line drivers
- High frequency line drivers
- Isolated Supplies for Motor Control
- Broadcast equipment
- Dual-Battery Systems
- Commercial and agricultural vehicles (CAV)
