IXDI404SI-16
| Parameters | |
|---|---|
| Turn On Delay Time | 40 ns |
| Rise Time | 18ns |
| Fall Time (Typ) | 17 ns |
| Turn-Off Delay Time | 39 ns |
| Rise / Fall Time (Typ) | 16ns 13ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.059 µs |
| Built-in Protections | OVER CURRENT |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 550.009098mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Technology | MOS |
| Voltage - Supply | 4.5V~35V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*404 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Nominal Supply Current | 3mA |
| Output Current | 4A |
| Input Type | Inverting |
IXDI404SI-16 Overview
For greater flexibility, the 16-SOIC (0.295, 7.50mm Width) package is adopted.Gate drivers is packaged in the way of Tube.The configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.WGate driversh a 4.5V~35V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate type IGBT, N-Channel, P-Channel MOSFET has been used in its design.For this device, the temperature range is -55°C~150°C TJ.Inverting is used as the input type in this program.The configuration starts with 16 terminations.There are various related parts under its base part number IXD*404.Mosfet driver is mounted using Surface Mount.In the device, there are 16 pins.The device is specifically designed to function with a supply voltage of 18V V.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED PERIPHERAL DRIVER as Mosfet drivers interface chip.The board contains 16 pins for component connections.This device supports a current output of 4A at the output.
IXDI404SI-16 Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
16 pins
IXDI404SI-16 Applications
There are a lot of IXYS IXDI404SI-16 gate drivers applications.
- Motor Control
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Topologies
- White Goods - Air Conditioner, Washing Machine,
- Motor Controls
- High-speed communications
- Industrial Modules
- RGB applications
- General Purpose 3-Phase Inverter
- High power buffers
