IXDI414CI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Weight | 2.299997g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 2W |
| Voltage - Supply | 4.5V~35V |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXD*414 |
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 35V |
| Nominal Supply Current | 3mA |
| Output Current | 14A |
| Input Type | Inverting |
| Rise Time | 27ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 22ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.033 µs |
| Output Peak Current Limit-Nom | 14A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 14A 14A |
| Logic Voltage - VIL, VIH | 0.8V 3.5V |
| Turn Off Time | 0.034 µs |
| RoHS Status | RoHS Compliant |
IXDI414CI Overview
There is greater flexibility with the TO-220-5 package.Tube represents the packaging method.There are 1 drivers installed for this device.There is a mounting bracket in the way of Through Hole.In the absence of a 4.5V~35V supply voltage, it can demonstrate its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.The allowable temperature range that this device can be operated in is -55°C~150°C TJ.Input type of Inverting is used.Mosfet driver is based on 5 terminations.The base part number IXD*414 refers to a number of related parts.Mounting the device requires Through Hole.Mosfet driver is designed specifically to run on 18V volts of power.BUFFER OR INVERTER BASED PERIPHERAL DRIVER is employed as its interface IC.The board has a total of 3 component pins.The output current can be set to 14A.According to its maximum power dissipation, 2W is capable of conducting and transferring a large amount of power without overheating.As a rule of thumb, the operating supply voltage should be set to 35V.
IXDI414CI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
Maximum power dissipation of 2W
IXDI414CI Applications
There are a lot of IXYS IXDI414CI gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Smart Phones
- Digitally controlled power supplies
- Industrial Modules
- UPS systems
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Portable Navigation Devices
- Portable computers
- AC-DC Inverters
