IXDI430MCI
| Parameters | |
|---|---|
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T5 |
| Qualification Status | Not Qualified |
| Max Output Current | 30A |
| Nominal Supply Current | 3mA |
| Output Current | 30A |
| Input Type | Inverting |
| Rise Time | 20ns |
| Fall Time (Typ) | 18 ns |
| Rise / Fall Time (Typ) | 18ns 16ns |
| Interface IC Type | BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 µs |
| Output Peak Current Limit-Nom | 30A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 30A 30A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 3.5V |
| Turn Off Time | 0.039 µs |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Weight | 2.299997g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Bulk |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 2W |
| Voltage - Supply | 8.5V~35V |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXD*430 |
IXDI430MCI Overview
In order to increase flexibility, the package TO-220-5 is used.Gate drivers is package in Bulk case.Configuration is supported by 1 drivers.It's mounted on the way to Through Hole.In the absence of a power supply voltage of 8.5V~35V V, it is able to demonstrate its superiority.A gate type of IGBT, N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -55°C~150°C TJ.Inverting is used as the input type.Initially, the configuration is composed of 5 terminations.Under its base part number IXD*430, various related parts can be found.Mosfet driver is mounted using Through Hole.In order to operate, a voltage of 18V has to be applied.There is an interface IC called BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER that is employed in this device.Mosfet driver is possible to achieve a maximum output current of 30A.On the board, there are 3 component pins.The device is capable of delivering a current of 30A.Considering its maximum power dissipation, 2W shows its maximum capacity to transfer and conduct power loss without overheating.
IXDI430MCI Features
Embedded in the Bulk package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
Maximum power dissipation of 2W
IXDI430MCI Applications
There are a lot of IXYS IXDI430MCI gate drivers applications.
- Dual-Battery Systems
- 3-Phase Motor Inverter Driver
- Industrial motor drives - compact, standard, premium, servo drives
- Motor controllers
- serial peripheral interface (SPI), I2C
- Isolated Supplies for controller area network (CAN),
- Refrigerator
- Pulse transformer drivers
- Isolated switch mode power supplies (SMPS)
- Isolated Supplies for Motor Control
