IXDI502D1T/R
| Parameters | |
|---|---|
| Fall Time (Typ) | 9 ns |
| Rise / Fall Time (Typ) | 7.5ns 6.5ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Turn Off Time | 0.038 μs |
| Height Seated (Max) | 0.9mm |
| Length | 5mm |
| Width | 3.99mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*502 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-N6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 3mA |
| Input Type | Inverting |
| Rise Time | 10ns |
IXDI502D1T/R Overview
Its 6-VDFN Exposed Pad package is adopted for higher flexibility.Gate drivers is packaged in the way of Tape & Reel (TR).Configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is set to 4.5V~30V, it can demonstrate its superiority.IGBT, N-Channel, P-Channel MOSFET is the gate type used for this design.Mosfet driver is possible to use this device at temperatures as low as -55°C~150°C TJ.Inverting is used as the input type in this program.6 terminations constitute its foundation.There are numerous related parts listed under its base part number IXD*502.This device operates with 15V supply voltage.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.There are several useful electronic components found in its subcategory of MOSFET Drivers.Components with 6 pins are available.Due to its 4.5/30V power supply, it can solve power supply problems for an array of diverse applications.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 15V.
IXDI502D1T/R Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
IXDI502D1T/R Applications
There are a lot of IXYS IXDI502D1T/R gate drivers applications.
- Solar power supplies
- Uninterruptible Power Supplies (UPS)
- Digitally controlled power supplies
- PCMCIA applications
- Head-up and Head mounted displays
- Video amplifiers
- Motor controllers
- High frequency line drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- General Purpose 3-Phase Inverter
