IXDI509PI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Weight | 599.989307mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*509 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 75mA |
| Input Type | Inverting |
| Rise Time | 45ns |
| Fall Time (Typ) | 40 ns |
| Rise / Fall Time (Typ) | 25ns 23ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.055 μs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height Seated (Max) | 4.57mm |
| Length | 9.59mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
IXDI509PI Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.A packaging method of Tube is used.Configuration is supported by 1 drivers.Ideally, it should be mounted in the direction of Through Hole.In the absence of a power supply voltage of 4.5V~30V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel, P-Channel MOSFET.For this device, the temperature range is -55°C~150°C TJ.This program uses the input type of Inverting.Initially, the configuration is composed of 8 terminations.Many related parts can be found under its base part number IXD*509.Mosfet driver is mounted using Through Hole.A voltage of 18V is required for its operation.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.A total of 8 pins are available for component connections.The power supply 4.5/30V of the product solves the power supply problem for a variety of applications.
IXDI509PI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
IXDI509PI Applications
There are a lot of IXYS IXDI509PI gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Industrial motor drives - compact, standard, premium, servo drives
- Broadcast equipment
- Active filtering
- Refrigerator
- Portable Navigation Devices
- 3-Phase Motor Inverter Driver
- RGB applications
- serial peripheral interface (SPI), I2C
- High-speed communications
