IXDN402PI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 599.989307mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~35V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXD*402 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 35V |
| Nominal Supply Current | 3mA |
| Output Current | 2A |
| Input Type | Non-Inverting |
| Rise Time | 10ns |
| Fall Time (Typ) | 9 ns |
| Rise / Fall Time (Typ) | 8ns 8ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Height Seated (Max) | 4.57mm |
| Length | 9.59mm |
| RoHS Status | RoHS Compliant |
IXDN402PI Overview
A higher level of flexibility is provided by its 8-DIP (0.300, 7.62mm) package.Tube represents the package.Gate drivers is configured wGate driversh 2 drivers.Through Hole is mounted in the way of the device.In the absence of a 4.5V~35V supply voltage, its superiority can be demonstrated.IGBT, N-Channel, P-Channel MOSFET is the gate type used for this design.In this device, temperatures must not exceed -55°C~150°C TJ.A type of Non-Inverting is used for input in this program.The configuration is based on 8 terminations.Numerous related parts can be found under its base part number IXD*402.Devices are mounted by Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 18V.The interface IC of the device is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.There are several useful electronic components in this subcategory of MOSFET Drivers.The number of component pins is 8.This device supports a current output of 2A at the output.The operating supply voltage should be set at 35V.
IXDN402PI Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDN402PI Applications
There are a lot of IXYS IXDN402PI gate drivers applications.
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- High power buffers
- serial peripheral interface (SPI), I2C
- Topologies
- Commercial air-conditioning (CAC)
- Telecom switch mode power supplies
- Head-up and Head mounted displays
- Motor controllers
- Industrial Power Supplies
- Dual-Battery Systems
