IXDN404SI-16
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 550.009098mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Technology | MOS |
| Voltage - Supply | 4.5V~35V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*404 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Max Output Current | 4A |
| Nominal Supply Current | 3mA |
| Output Current | 4A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 18ns |
| Fall Time (Typ) | 17 ns |
| Turn-Off Delay Time | 39 ns |
| Rise / Fall Time (Typ) | 16ns 13ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.059 μs |
| Built-in Protections | OVER CURRENT |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
IXDN404SI-16 Overview
A higher level of flexibility is provided by its 16-SOIC (0.295, 7.50mm Width) package.Tube represents the package.The configuration is supported by 2 drivers.It's mounted on the way to Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~35V.IGBT, N-Channel, P-Channel MOSFET is the gate type used for this design.This device is allowed to operate in a temperature range of -55°C~150°C TJ.The input type for this program is Non-Inverting.As a result of its configuration, it contains a maximum of 16 terminations.You will find various related parts under the base part number IXD*404.Mosfet driver is mounted using Surface Mount.The pins are configured with 16 when designing the chip.Specification is for 18V supply voltage operation.As its interface IC, BUFFER OR INVERTER BASED PERIPHERAL DRIVER is being employed.An output current as high as 4A can be achieved at maximum power.The board has a total of 16 component pins.The output current supported by the device is 4A.
IXDN404SI-16 Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
16 pins
IXDN404SI-16 Applications
There are a lot of IXYS IXDN404SI-16 gate drivers applications.
- General Purpose 3-Phase Inverter
- Isolated Gate Driver Supplies
- Line drivers
- Pulse transformer drivers
- 3-Phase Motor Inverter Driver
- A/D drivers
- Motor Drives
- LCD/LCoS/DLP portable and embedded pico projectors
- Commercial air-conditioning (CAC)
- Active filtering
