IXDN409PI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 599.989307mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 4.5V~35V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXD*409 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 9A |
| Nominal Supply Current | 3mA |
| Output Current | 9A |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ps |
| Rise Time | 15ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 3.5V |
| Turn Off Time | 0.036 µs |
| Height Seated (Max) | 4.57mm |
| Length | 9.59mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXDN409PI Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Gate drivers is packaged in the way of Tube.This device is equipped with 1 drivers for its configuration.Ideally, it should be mounted in the direction of Through Hole.In the absence of a 4.5V~35V supply voltage, it can demonstrate its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.The allowable temperature range that this device can be operated in is -55°C~150°C TJ.Non-Inverting is used as the input type.Initially, the configuration is composed of 8 terminations.Numerous related parts can be found under its base part number IXD*409.Mounting the device requires Through Hole.Devices have 8 pins available.A voltage of 18V is required for its operation.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.There is an output current limit of 9A for this device.A board with 8 component pins is available.This device is capable of delivering 9A current.
IXDN409PI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDN409PI Applications
There are a lot of IXYS IXDN409PI gate drivers applications.
- Portable Media Players
- Portable Navigation Devices
- Motor Controls
- High-voltage isolated DC-DC converters
- Solar power supplies
- High current laser/LED systems
- Industrial Modules
- Isolated Supplies for controller area network (CAN),
- Welding
- PCMCIA applications
